30+
Years Of Experience
Floors and Walls That Line Up
Tile Installation in Fairborn for kitchens, bathrooms, and backsplashes that need precise alignment and waterproof grout lines
LDS Construction Solutions installs tile for homeowners and commercial clients in Fairborn who are upgrading floors, showers, backsplashes, or entryways. You receive tiles laid with consistent spacing, straight lines, and grout that seals joints against moisture and stains. The work fits into remodels, new construction, or standalone upgrades when you want durable surfaces that look clean and hold up to daily use.
Tile installation begins with surface prep, which includes leveling the subfloor or wall, applying a waterproof membrane in wet areas, and marking layout lines to center the pattern. Thin-set mortar is troweled onto the surface, and tiles are pressed into place with spacers to maintain uniform gaps. Cuts around fixtures, corners, and edges are made with a wet saw to fit precisely without chipping. Once the mortar cures, grout is pushed into the joints and wiped clean, then sealed to resist water penetration.
If you are planning a tile project in Fairborn, contact LDS Construction Solutions for a free estimate and to review material options and layout ideas.
What You Notice After Tile Is Installed
You will see straight grout lines that run parallel or perpendicular to walls, with no lippage where one tile sits higher than the next. Corners meet cleanly, and cuts around outlets, faucets, and drains fit tightly without gaps. Sealed grout resists water and dirt, so it stays lighter longer and wipes clean without scrubbing. Floors feel solid underfoot because the subfloor was leveled and the mortar was spread evenly before tiles went down.
LDS Construction Solutions selects the right mortar and grout for the tile type and location, which matters for adhesion and longevity. Large-format tiles require different handling than small mosaics, and natural stone needs sealing beyond what ceramic or porcelain requires. You receive guidance on slip resistance for floors and finish options for walls.
The work includes tile installation, grout, and basic waterproofing, but does not cover plumbing fixture installation or structural subfloor repairs unless arranged in advance. Specialty layouts like herringbone or diagonal patterns take longer and may increase labor costs.
Tile Installation Questions
Clients often ask about curing times, grout sealing, and how to choose between tile types for different rooms.
How long does tile need to cure before you can walk on it?
Most floors can be walked on after 24 hours, but grout should cure for 48 to 72 hours before heavy use or exposure to water.
What is the difference between sanded and unsanded grout?
Sanded grout is used for joints wider than one-eighth inch and resists cracking, while unsanded grout is smoother and used for narrow joints and polished stone that sanded grout might scratch.
Why does grout crack or crumble over time?
Movement in the subfloor, missing expansion joints, or grout that was mixed too wet can all cause cracking, especially in high-traffic areas or over wood subfloors.
What type of tile works best for bathroom floors in Fairborn?
Porcelain or ceramic with a textured or matte finish provides slip resistance when wet, and both materials handle moisture and temperature changes common in Ohio bathrooms.
When should you seal grout after installation?
Grout should be sealed after it fully cures, typically 48 to 72 hours after installation, and resealed every one to two years depending on traffic and cleaning habits.
LDS Construction Solutions provides free estimates for tile installation in Fairborn. Call to discuss your design preferences and project timeline.